How to clean new tiles after construction that keep leaving a white veil?

Cleaning new tile after construction that continues to leave a white veil is the most annoying part of any renovation project. Any renovation you do, whether it’s remodeling a kitchen, bathroom, or entryway, will leave your home looking dirty afterward. Cleaning up after construction is almost impossible to prevent, even with delicate paper covers and careful craftsmanship. However, you don’t need to panic! If you have the right home remedies and follow the right steps, you can quickly and easily get rid of all the dirt, dust and large debris left behind after the renovation.

Find the best way to clean your house after construction

Hiring home improvement contractors has many advantages. Not only will they ensure that the construction is done right, but they will also keep your home clean during the renovation process. Professional contractors will cover the vents, put cardboard on the floors and take care of the large debris left behind. Cleaning varies depending on the company you choose, some of them clean as they work, while others do it at the end of the project.

Either way, hiring the experts will definitely make cleaning up after the renovation much easier for you.

cleaning new tile after construction site tip to open and repair gray tiles



And if it doesn’t happen, you have to be patient during cleaning. After thoroughly cleaning all areas of your home, vacuum the floor and mop the floor.

Whether it’s installing new tiles, replacing pipes, or building a new plumbing system, any construction job leaves dirt and stains on the tile. They can be difficult to clean, because after repair work they can be covered with dust and construction particles such as glue, silicone, cement and other adhesive materials. You can clean bathroom tiles with various solutions and a damp cloth or with a steam cleaner. Both methods can also be combined to make your floor shiny. You must first use a microfiber cloth to wipe the tiles to thoroughly clean the construction dust. Don’t forget to clean the baseboards too. Once this step is completed, you can proceed with wet cleaning.

It is best to clean the floor last

cleaning new tiles after construction site bath woman's hand wiping tiles

Which products are compatible with different soils?

After removing large debris from the floor, brush the floor thoroughly to ensure no construction particles remain. Then use a vacuum cleaner with a brush attachment to remove construction dust. Try to vacuum as much dust as possible. Once done, you can start wiping the floor with a damp cloth. Just use warm water to start, then apply a cleaning product suitable for the type of floor you have. Leaving construction debris untouched for several weeks will cause it to harden. Then even the most repeated rubbing with a strong thinner does not cure them.

The property of powerful chemical formulas to cause light stains on colored tiles is very important

cleaning new tiles after renovation tiles with pink stains

Thinners and acids

  • Varnish, varnish, glue, latex, silicone, lime – all are pre-treated to be completely removed from facing plates. They have several varieties, a product of organic solvents, aromatic and aliphatic hydrocarbons, ketones (acetone), alcohol, turpentine.
  • Acids are also used to dissolve dried building mixes. They are less powerful in their natural form. Tartaric, citric, phosphoric, hydrochloric, hydrochloric and glycolic acids and others are part of solutions that help break down dried building materials.
  • They are present in your home in the form of wine vinegar, lemon juice, yogurt, citrus juice (glycolic acid) and several other products. Mixed with salt/baking soda, these ingredients form a paste that only has an active effect on these remaining stains.

Vinegar

You can clean the floor by adding vinegar to water instead of detergent – ​​a glass of water is enough. Vinegar perfectly removes stains and restores shine. Apply to the floor as desired – using a microfiber cloth, rag or mop.

You should only use this DIY cleaning solution if your tiles are porcelain or ceramic. It is not suitable for other surfaces such as porous stone or slate tile.

The acidity of the vinegar can harm them

how to clean new tiles after work woman cleaning bathroom floor

Baking soda

For ceramic tiles, use baking soda. Mix baking soda with water and stir until a smooth paste is formed. Apply the mixture to the marks and rub them with a cloth. When you’re done, be sure to thoroughly rinse off any residue from the tiles. Natural stone tiles and slabs should not be treated with baking soda. To achieve a glossy finish on the floor, you may need to mop it several times. Allow the floor to dry completely.

What can be done to restore the shiny appearance of tiled surfaces?

How do you clean up fine construction dust after a complete home renovation? Here are some helpful tips on how to clean up construction dust:

  • You need to thoroughly clean your hard surfaces from top to bottom, starting with your walls.
  • If there is haze, it should be removed when the soil surface is completely dry. Consult your installation professional for recommended drying time. In most cases, you will need to wait about 24 hours.

Sources:

blockrenovation.com©

Leave a Reply

Your email address will not be published. Required fields are marked *